How should the battery swapping cabinet be installed?

What are the standards for installing battery swapping cabinets?
Preliminary preparation:
Personnel: Installation workers, professional electricians
Equipment: Forklift (depending on the situation), electric drill, impact drill, national standard cable (according to the manufacturer's requirements)
Weather: Involving electricity usage, try to avoid installation on rainy days as much as possible

Indoor installation requirements for battery swapping cabinets:
There should be physical walls separating the battery swapping area from other production and living areas
The battery swapping area should not hinder evacuation
When the room temperature in the battery swapping area reaches 35 ℃, the exhaust facilities should be activated, and the exhaust volume should be calculated at 60 m3/(h × m2)
Fire extinguishers or other fire-fighting facilities should be equipped, and the configuration of fire extinguishers should comply with the relevant provisions of GB 50140-2005

Requirements for outdoor installation of battery swapping cabinets:
It should be installed on a solid and flat cement floor of 15 cm or more
Adequate distance should be left around the battery swapping cabinet to ensure heat dissipation and maintenance
A line should be drawn at least 1 meter outside the front of the battery swapping cabinet to isolate the swapping area from the parking area
A roof should be installed in the charging and swapping area to ensure sun and rain protection

Palavras- Chaves Quentes: